-
Skirting board are using for finishing floors and wall space. Available along with fixing latching system profile and end corners. This skirting anodized aluminum profile is easy to install and allows one to cover and protect low running cables over the perimeter providing an elegant finish to low wall corners. The internal interlocking support piece is fixed to the wall with screws. This profile is ideal for office environment for both aesthetic requirements and for telephone and computer wire passage. In fact, the aluminum skirting board joins wall and floor naturally, perfectly matching the room’s furnishing. -
The Stilmat installation frame 1.0 is “L” type of frame, which covers edges of the mat well base. It can be used for any existing mat well base. It consists of angled profiles with corners. It is 1.5 mm high and compatible with Stilmat models Prinz, Royal ,Mogul, Magnat, Empiree, President, King, Imperator, Baron. -
The Stilmat installation frame model “ L with rubber “, is “L” type of frame, which covers edges of the mat well base. Made in anodized aluminum and comes with a colored ribbed anti-slip rubber insert, which improves slip resistance. It can be used for any existing mat well base. It consists of angled profiles with corners. The frame is supplied either ready for assembly. It is 7 mm height. It is compatible with all Stilmat doormat models with proper mat well base depth. The frame is supplied either ready for assembly or pre-assembled (e.g. in the case of frames with curved sections or several sections, etc.). -
The Stilmat installation frame 2.0 is “L” type of frame, which covers edges of the mat well base. It can be used for any existing mat well base. It consists of angled profiles with corners. It is 1.5mm height. It is compatible with Stilmat model Magnat, Empiree, President, King, Imperator, Baron. -
The Stilmat installation frame 2.5 ( up to 25mm high) for mat well base gives elegant final touch to any inbuilt Stilmat doormat. It consists of angled profiles with stainless steel specially designed corners. This Stilmat installation frame comes with wall anchors, free of charge. The frame is supplied either ready for assembly or pre-assembled (e.g. in the case of frames with curved sections or several sections, etc.). It is compatible with Stilmat models: Prinz, Royal, Mogul,Magnat, Empire, President, King and Imperator. -
The Stilmat installation frame 2.2 is “L” type of frame, which covers edges of the mat well base. It can be used for any existing mat well base. It consists of angled profiles with corners. It is 1.5mm height. . It is compatible with Stilmat models Empire, President, King, Imperator and Baron. -
The Stilmat installation frame 3.0 ( up to 30mm high) for mat well base gives elegant final touch to any inbuilt Stilmat doormat. It consists of angled profiles with stainless steel specially designed corners. This Stilmat installation frame comes with wall anchors, free of charge. The frame is supplied either ready for assembly or pre-assembled (e.g. in the case of frames with curved sections or several sections, etc.). It is compatible with Stilmat model Baron.
-
Stilmat nadgradni ram sa svojim nagibom omogućava prelaz i sprečava mogučnost od saplitanja, kada se nagazi na Stilmat otirače. Koristi se kod Stilmat otirača koji se postavljaju na gotovu podnu podlogu. -
The Stilmat Ramping frame 2025 with its gradient gives a smooth approach for and eliminates possible trip hazards when stepping onto the Stilmat doormats. It is used for Stilmat doormats that are mounted on finished floors at ground level. It consists of angled profiles with stainless steel specially designed corners in it. The frame is supplied either ready for assembly or pre-assembled. Mounting with special glue or with anchors. It can consist of 1-4 edges standard, or even more for special shapes. It is compatible with Stilmat models: Empire, President, King and Imperator. -
Stilmat Stair anti-slip L profile is an stair nosing anodized aluminum “L” type profile with a colored ribbed rubber insert, that can be fitted over the edge of laminate, wood flooring, thin carpets or ceramic tile stairways after installation. This anti slip stair nose edging defines, refinishes and protects the step corners of an already laid flooring and is ideal in repairing and renovating existing stairs and steps in poor condition. Ribbed anti-slip rubber insert improves slip resistance, and can be replaced when worn. It can be fixed by special glue or screws which are placed within the insert track and covered by rubber insert, so that the screws become invisible. -
Stilmat Stair anti-slip profile is an flat anodized aluminum profile with a colored ribbed rubber insert, that can be fitted over the edge of laminate, wood flooring, thin carpets or ceramic tile stairways after installation. This anti slip stair nose edging defines, refinishes and protects the step corners of an already laid flooring and is ideal in repairing and renovating existing stairs and steps in poor condition. Ribbed anti-slip rubber insert improves slip resistance, and can be replaced when worn. It can be fixed by special glue or screws which are placed within the insert track and covered by rubber insert, so that the screws become invisible.Each trim comes in manufacturers packaging supplied with installation screws.
