Stilmat Installation frame model 2.5 – up to 25 mm

Home/Frame/Stilmat Installation frame model 2.5 – up to 25 mm

Stilmat Installation frame model 2.5 – up to 25 mm

The Stilmat  installation frame  2.5 ( up to 25mm high)  for mat well base gives elegant final touch to any inbuilt  Stilmat doormat. It  consists of angled profiles with stainless steel  specially designed  corners. This Stilmat installation frame comes with  wall anchors, free of charge. The frame is supplied either ready for assembly or pre-assembled (e.g. in the case of frames with curved sections or several sections, etc.). It is compatible with Stilmat models: Prinz, Royal, Mogul,Magnat, Empire, President, King and Imperator.

Add to cart

Description

The Stilmat  installation frame  2.5 ( up to 25mm high)  for mat well base gives elegant final touch to any inbuilt  Stilmat doormat. It  consists of angled profiles with stainless steel  specially designed  corners. This Stilmat installation frame comes with  wall anchors, free of charge. The frame is supplied either ready for assembly or pre-assembled (e.g. in the case of frames with curved sections or several sections, etc.). It is compatible with Stilmat models: Prinz, Royal, Mogul,Magnat, Empire, President, King and Imperator.

Features:

  • Modern design
  • Matching the height of the doormats
  • Hard anodized.
  • Reinforced with thicker supporting walls
  • Assembled with stainless steel corners for perfect joining and fitting the sides
  • The perfect finishing touch for STILMAT mat.

Additional information

Model
SKU:

IF 25

Height (mm)

25

Frame - dimensions

30 x 25

Entrance position

Outside and inside

Load

Extreme

Roll-over and drive-over capability:

Baby strollers, Hand trolley, Rolling luggage, Shopping trolley, Wheelchairs

Made from:

Made from rigid anodized aluminum and stainless steel corners

Coating:

Fully anodized, to increase resistance to corrosion and wear, More aesthetically pleasing finish and harder surface than pure aluminum.

Wall thickness of the profile (mm)

1.5

Connection

Stainless steel corners

Max width/ profile length for each individual section

6000

Max depth/walking depth for individual units (mm):

6000

Depth of the opening (mm):

25mm or more. Please, read installation guide (below)*

Compatible with Stilmat models:

Empire, Imperator, King, Magnat, Mogul, President, Prinz, Royal

Installation instructions:

Optional – fill the frame with concrete to the necessary depth and according to the Stilmat model of the mat., The frame must be flush with both the screed in the mat well and the floor covering, The frame must be flush with both the screed in the mat well and the floor covering . Mat and mat well: The mat well base , which is usually screed, must be completely leveled., The mat well base , which is usually screed, must be completely leveled, This installation frame comes with wall anchors

Contact:

STILMAT

Warranty:

5 years

Stilmat Installation frame model 2.5 – up to 25 mm

SKU: