Stilmat nadgradni ram sa svojim nagibom omogućava prelaz i sprečava mogučnost od saplitanja, kada se nagazi na Stilmat otirače. Koristi se kod Stilmat otirača koji se postavljaju na gotovu podnu podlogu.
Stilmat ramping frame 1520
Description
The Stilmat Ramping frame 1520 with its gradient gives a smooth approach for and eliminates possible trip hazards when stepping onto the Stilmat doormats. It is used for Stilmat doormats that are mounted on finished floors at ground level. It consists of angled profiles with stainless steel specially designed corners in it. The frame is supplied either ready for assembly or pre-assembled. Mounting with special glue or with anchors. It can consist of 1-4 edges standard, or even more for special shapes. It is compatible with Stilmat models: Royal, Mogul and Magnat.
Features:
- It can be mounted on finished floors at ground level
- It can be used for front side of mat , or on 2,3 and 4 sides of mat
- Matching the height of the doormats
- Hard anodized
- Reinforced with thicker supporting walls
- Assembled with stainless steel corners for perfect joining and fitting the sides
- The perfect finishing touch for STILMAT mats.
Additional information
| Model | |
|---|---|
| SKU: | |
| Height (mm) cca: | 17 |
| Frame - dimensions | 58 x 17 |
| Entrance position | Outside and inside |
| Load | Extreme |
| Roll-over and drive-over capability: | Baby strollers, Hand trolley, Rolling luggage, Shopping trolley, Wheelchairs |
| Made from: | Made from rigid anodized aluminum and stainless steel corners |
| Coating: | Fully anodized, to increase resistance to corrosion and wear, More aesthetically pleasing finish and harder surface than pure aluminum. |
| Wall thickness of the profile (mm) | 2.5 |
| Connection | Stainless steel corners |
| Max width/ profile length for each individual section | 3000 |
| Max depth/walking depth for individual units (mm): | 3000 |
| Frame height (mm): | |
| Compatible with Stilmat models: | Magnat, Mogul, Royal |
| Installation instructions: | It is used for STILMAT doormats that are mounted on finished floors at ground level, Mounting with special glue or with screws (if there is no risk of surface damaging), The mat well base , which is usually screed, must be completely leveled. |
| Contact: | STILMAT |
| Warranty: | 5 years |
The Stilmat Ramping frame 1520 with its gradient gives a smooth approach for and eliminates possible trip hazards when stepping onto the Stilmat doormats. It is used for Stilmat doormats that are mounted on finished floors at ground level. It consists of angled profiles with stainless steel specially designed corners in it. The frame is supplied either ready for assembly or pre-assembled. Mounting with special glue or with anchors. It can consist of 1-4 edges standard, or even more for special shapes. It is compatible with Stilmat models: Royal, Mogul and Magnat.
Stilmat ramping frame 1520
SKU:
