The Stilmat installation frame 3.0 ( up to 30mm high) for mat well base gives elegant final touch to any inbuilt Stilmat doormat. It consists of angled profiles with stainless steel specially designed corners. This Stilmat installation frame comes with wall anchors, free of charge. The frame is supplied either ready for assembly or pre-assembled (e.g. in the case of frames with curved sections or several sections, etc.). It is compatible with Stilmat model Baron.
Stilmat Installation frame model 3.0 – up to 30 mm
Description
The Stilmat installation frame 3.0 ( up to 30mm high) for mat well base gives elegant final touch to any inbuilt Stilmat doormat. It consists of angled profiles with stainless steel specially designed corners. This Stilmat installation frame comes with wall anchors, free of charge. The frame is supplied either ready for assembly or pre-assembled (e.g. in the case of frames with curved sections or several sections, etc.). It is compatible with Stilmat model Baron.
Features:
- Modern design
- Matching the height of the doormats
- Hard anodized.
- Reinforced with thicker supporting walls
- Assembled with stainless steel corners for perfect joining and fitting the sides
- The perfect finishing touch for Stilmat mat.
Additional information
| Model | |
|---|---|
| SKU: | IF 30 |
| Height (mm) | 30 |
| Frame - dimensions | 25 x 30 |
| Entrance position | Outside and inside |
| Load | Extreme |
| Roll-over and drive-over capability: | Baby strollers, Hand trolley, Rolling luggage, Shopping trolley, Wheelchairs |
| Made from: | Made from rigid anodized aluminum and stainless steel corners |
| Coating: | Fully anodized, to increase resistance to corrosion and wear, More aesthetically pleasing finish and harder surface than pure aluminum. |
| Wall thickness of the profile (mm) | 1.5 |
| Connection | Stainless steel corners |
| Max width/ profile length for each individual section | 6000 |
| Max depth/walking depth for individual units (mm): | 6000 |
| Depth of the opening (mm): | 30mm or more. Please, read installation guide (below)* |
| Compatible with Stilmat models: | Baron |
| Installation instructions: | Optional – fill the frame with concrete to the necessary depth and according to the Stilmat model of the mat., The frame must be flush with both the screed in the mat well and the floor covering, The frame must be flush with both the screed in the mat well and the floor covering . Mat and mat well: The mat well base , which is usually screed, must be completely leveled., The mat well base , which is usually screed, must be completely leveled, This installation frame comes with wall anchors |
| Contact: | STILMAT |
| Warranty: | 5 years |
Stilmat Installation frame model 3.0 – up to 30 mm
SKU:
