The STILMAT Ramping frame 1520 with its attractive design and reduced gradient gives a smooth approach and eliminates possible trip hazards when stepping onto the STILMAT doormats. It is used for STILMAT doormats that are mounted on finished floors at ground level. It consists of angled profiles and stainless steel specially designed corners with screws in it. The frame is supplied either ready for assembly or pre-assembled.
STILMAT RAMPING FRAME 1520
Description
The STILMAT Ramping frame 1520 with its attractive design and reduced gradient gives a smooth approach and eliminates possible trip hazards when stepping onto the STILMAT doormats. It is used for STILMAT doormats that are mounted on finished floors at ground level. It consists of angled profiles and stainless steel specially designed corners with screws in it. The frame is supplied either ready for assembly or pre-assembled. Mounting with special glue or with anchors. It can consist of 1-4 edges standard, or even more for special shapes. It is suitable for all high/traffic buildings, because it has thicker profile walls. It is compatible with STILMAT models: Royal, Mogul, Magnat, Vice president, President, King and Imperator.
Features:
- Attractive design
- Reduced gradient
- It can be mounted on finished floors at ground level
- It can be used for front side of mat , or on 2,3 and 4 sides of mat
- Matching the height of the doormats
- Hard anodized
- Reinforced with thicker supporting walls
- Assembled with stainless steel corner for perfect joining and fitting the sides
- The perfect finishing touch for STILMAT mats.
Additional information
| Model | |
|---|---|
| SKU: | |
| Height (mm) cca: | 20 |
| Frame - dimensions | 58 x 17 |
| Entrance position | Outside and inside |
| Load | Extreme |
| Roll-over and drive-over capability: | Baby strollers, Hand trolley, Rolling luggage, Shopping trolley, Wheelchairs |
| Made from: | |
| Coating: | Fully anodized, to increase resistance to corrosion and wear, More aesthetically pleasing finish and harder surface than pure aluminum. |
| Wall thickness of the profile (mm) | |
| Connection | Stainless steel corners |
| Compatible with Stilmat models: | Imperator, King, Magnat, Mogul, President, Royal |
| Contact: | STILMAT |
| Warranty: | 5 years |
| Description: | Ramping frame, attractive design, with its reduced gradient gives a smooth approach and eliminates possible trip hazards when stepping onto the STILMAT doormats. It is used for STILMAT doormats that are mounted on finished floors at ground level. It consists of angled profiles and stainless steel specially designed corners and screws in it. The frame is supplied either ready for assembly or pre-assembled. Mounting with special glue or with anchors. It can consist of 1-4 edges standard, or even more for special shapes. It is suitable for all high/ traffic buildings, because it has thicker profile walls. It is compatible with STILMAT models: Royal, Mogul, Magnat, Vice president, President, King and Imperator |
| Model: | STILMAT Ramping frame model 1520 |
| Code: | IF 1520 |
| Height (mm) cca: | 20 |
| Frame dimensions: | 58 x 17 |
| 65 x 20 | |
| Entrance position: | Indoors/outdoors |
| Load: | Extreme |
| Dozvoljen prelaz kolicima: | Invalidskim kolicima, Bebi kolicima, Koferima sa točkićima, Ručnim kolicima i Šoping kolicima |
| Roll-over and drive-over capability: | Wheelchairs, Prams, Hand and Light shopping trolleys |
| Support chassis: | Made from rigid anodized aluminum with stainless steel corners |
| Aluminum coating:: | Fully anodized, to increase resistance to corrosion and wear. More aesthetically pleasing finish and harder surface than pure aluminum. |
| Aluminum material thickness (mm): | 2.0 |
| Connection: | |
| Contact: | STILMAT |
STILMAT RAMPING FRAME 1520
SKU: IF 1520
