-
Stilmat Rubber anti slip floor runners has the raised Circular Pattern or Checker Plate designed surface and a flat reverse side. The non-directional pattern gives this floors a non-slip surface that is still easy to mop/clean and wont trap dirt, unlike some other types of non-slip floors. It is extremely durable and makes an ideal walkway for heavy foot traffic. Made of the same type of material, which is used for 50% of car tires.
-
Stilmat Spaghetti runners are multipurpose, durable, flexible and roll-up. It is PVC runner for laying on the floor indoor or outdoor. Ultra violet resistant performs well in different climates and adapts to any. Suitable for wheeled traffic. Any geometric shape is available on demand. Does not absorb water. Application:, Sauna, Swimming pool, Bath, Plunge, Gyms, Stairs. Simple maintenance: just turn the mat over, shake it, vacuum or rinse with water, dirt and grime will be flushed out, leaving mat fresh and new again.
-
Portable or Fixed Stilmat aluminum ramps - The ideal solution for mobile or fixed connection of different height surfaces. Ensure the free movement for children, the elderly, persons with reduced mobility and persons with disabilities. Made of aluminum and anti slip rubber. Easy to install, durable and easy to maintain.
-
The Stilmat installation frame model “ L with rubber “, is “L” type of frame, which covers edges of the mat well base. Made in anodized aluminum and comes with a colored ribbed anti-slip rubber insert, which improves slip resistance. It can be used for any existing mat well base. It consists of angled profiles with corners. The frame is supplied either ready for assembly. It is 7 mm height. It is compatible with all Stilmat doormat models with proper mat well base depth. The frame is supplied either ready for assembly or pre-assembled (e.g. in the case of frames with curved sections or several sections, etc.).
-
The Stilmat installation frame 3.0 ( up to 30mm high) for mat well base gives elegant final touch to any inbuilt Stilmat doormat. It consists of angled profiles with stainless steel specially designed corners. This Stilmat installation frame comes with wall anchors, free of charge. The frame is supplied either ready for assembly or pre-assembled (e.g. in the case of frames with curved sections or several sections, etc.). It is compatible with Stilmat model Baron.
-
The Stilmat installation frame 2.5 ( up to 25mm high) for mat well base gives elegant final touch to any inbuilt Stilmat doormat. It consists of angled profiles with stainless steel specially designed corners. This Stilmat installation frame comes with wall anchors, free of charge. The frame is supplied either ready for assembly or pre-assembled (e.g. in the case of frames with curved sections or several sections, etc.). It is compatible with Stilmat models: Prinz, Royal, Mogul,Magnat, Empire, President, King and Imperator.
-
The Stilmat installation frame 1.0 is “L” type of frame, which covers edges of the mat well base. It can be used for any existing mat well base. It consists of angled profiles with corners. It is 1.5 mm high and compatible with Stilmat models Prinz, Royal ,Mogul, Magnat, Empiree, President, King, Imperator, Baron.
-
Stilmat Stair anti-slip profile is an flat anodized aluminum profile with a colored ribbed rubber insert, that can be fitted over the edge of laminate, wood flooring, thin carpets or ceramic tile stairways after installation. This anti slip stair nose edging defines, refinishes and protects the step corners of an already laid flooring and is ideal in repairing and renovating existing stairs and steps in poor condition. Ribbed anti-slip rubber insert improves slip resistance, and can be replaced when worn. It can be fixed by special glue or screws which are placed within the insert track and covered by rubber insert, so that the screws become invisible.Each trim comes in manufacturers packaging supplied with installation screws.
-
The Stilmat Ramping frame 2025 with its gradient gives a smooth approach for and eliminates possible trip hazards when stepping onto the Stilmat doormats. It is used for Stilmat doormats that are mounted on finished floors at ground level. It consists of angled profiles with stainless steel specially designed corners in it. The frame is supplied either ready for assembly or pre-assembled. Mounting with special glue or with anchors. It can consist of 1-4 edges standard, or even more for special shapes. It is compatible with Stilmat models: Empire, President, King and Imperator.
-
Stilmat Disinfection Barriers (with ramping frame) are made from aluminum construction with PVC inlay. Ideal for cleaning and disinfection shoes and boots at the sole and by sides. Disinfectant cleaning liquid prevents dirt, biological infections or cross contamination. The ideal mobile bio security tray for use in the food industry, animal breeding farms, laboratories, hospitals, task forces and other.